CRIMEA INC Call 317-617-9567
Underground utility contractor · Verona, WI

We put it under the ground. Without tearing up yours.

Directional boring, trenching, plowing and vacuum excavation for fiber, electric, gas, water and irrigation lines across Madison and South Central Wisconsin. Our own crews, our own equipment, on schedule.

10+years underground
5HDD drills, 10x15 to 24x40
Airjetting fiber blowing in house

What we install

Each service is marked in the same color the locator paints on the ground for that utility, so you know exactly what we handle.

Communications

Fiber & telecom

  • Fiber-to-the-home drops and mainline
  • Microduct and conduit placement
  • Fiber blowing / air jetting
  • Handholes, vaults, pedestals
Electric

Power conduit

  • Conduit and duct bank boring
  • Service conduit to homes, shops and garages
  • EV charger and outbuilding runs
  • Solar and generator conduit
Gas

Gas line boring

  • Service and main bores for utilities and their contractors
  • Road and driveway crossings
  • Bore for generator and heater lines
Water

Water service

  • Water service line boring and replacement
  • Well-to-house lines
  • Trenchless crossings under drives and roads
Irrigation

Sprinkler & irrigation

  • Sleeves under sidewalks and driveways
  • Mainline and lateral pulling
  • Boring for landscapers and irrigation contractors
Drain

Drainage

  • Downspout and sump discharge lines
  • Drain tile trenching
  • Culvert and drain crossings
Specialty service

Fiber blowing & air jetting

We own and run our own air-jetting fiber blowing machine. Compressed air floats the cable through the duct instead of pulling it, so long runs go in fast with no stress on the fiber.

Longer runs, fewer splices

Air carries the cable the full length of the duct, so one run can cover far more distance than a pull. Fewer splice points means a cleaner, cheaper network.

No stress on the cable

The fiber is pushed and floated, not dragged. No pulling tension, no kinks, no damage to the glass.

Upgrade without digging

Once microduct is in the ground, new or higher-count fiber can be blown in later. Your network grows without new excavation.

Microduct & microfiber

We place the microduct by boring, plowing or trenching, then blow in the microfiber, all with our own crews.

Duct testing first

We prove the duct before we blow: check for blockages and crushed sections, confirm the cable size fits the duct, and lubricate as needed.

Subcontract ready

Available to carriers, prime contractors and other installers who need a blowing crew for their duct.

PlaceMicroduct by bore, plow or trench ProveAir test and clear the duct PrepSize check and lubricate BlowJet fiber through with air CloseTest, document, as-builts

How we install

We pick the method that fits your soil, your yard and your budget. Most jobs get the least digging possible.

01 · TRENCHLESS

Directional boring

We steer a drill underground from point A to point B. Driveways, roads, trees and lawns stay in place.

02 · FAST

Vibratory plowing

Pulls cable or pipe straight into the ground with a narrow slit. The quickest way to cover long open runs.

03 · OPEN CUT

Trenching & excavation

Excavators and trenchers for vaults, tie-ins and jobs where open digging is the better value.

04 · SAFE DIG

Vacuum excavation

Potholing with air and water to expose existing utilities before we drill or dig near them.

Our own fleet

EquipmentWhat it does
HDD drillsVermeer and Ditch Witch: 10x15, 16x20, JT10, JT20, 24x40
Vibratory plowVermeer RTX750
Vac excavatorVermeer E800 Evacuator
ExcavatorsTrenching, pits and tie-ins
LocatingDigiTrak guidance systems
Fiber blowingAir-jetting machine for microduct and microfiber

Why hire us

We own the equipmentNo waiting on a rental yard. When we say we start Monday, we start Monday.
Locates called before every jobWe call Diggers Hotline and pothole near existing lines before we drill.
Proven on carrier workYears of fiber builds for regional telecom carriers, with as-built mapping and clean paperwork.
Homeowners to general contractorsOne service line or miles of conduit. We subcontract for GCs, utilities, electricians, plumbers and landscapers.

Service area

Based in Verona. We work across Dane County and South Central Wisconsin, and travel farther for larger projects.

VeronaMadisonFitchburgMiddletonSun PrairieWaunakeeOregonStoughtonMount HorebCross PlainsBlack EarthMazomanieMononaMcFarlandDeForestNew GlarusMonroeAlbanyJanesvilleDodgevilleBeaver Dam

Get a free quote

Tell us where the line starts and ends, about how long it is, and what's going in. We usually reply within one business day.

Phone / text317-617-9567 Emailcrimea.inc@gmail.com
Office811 Seven Winds Trail, Verona, WI

Opens your email app with the details filled in. Or call 317-617-9567.